In Keeping with the reliability and performance of our classic Titan-ATC Electronic Tankless Water Heater, we have developed the newer and more advanced TITAN-SCR2. The new TITAN-SCR2 incorporates new space age technology and features a faster and more accurate temperature sampling system, a manual resetable thermostat and a new air/water deferential analyzing system to prevent dry starts, (which is a key problem for other tankless systems.)

En Español

Click here for more Titan-SCR2 Information

Click here for Laser Products


By heating water only as it is needed the TITAN-SCR2 Tankless Water Heater eliminates the need for bulky water heaters that heat water continuously. This can reduce hot water costs up to 60% over conventional electric water heaters. The TITAN-SCR2's high efficiency is in part due to its dedicated analog microprocessor that samples input and output temperatures 21 times per second.

This power control system analyzes the data and manages power usage for maximum efficiency and temperature stability. At rest, the TITAN-SCR2 uses no power at all.

Available in seven models, the TITAN-SCR2 is ideal for a wide range of application. One TITAN-SCR2 unit can supply the hot water needs of home and apartments, and in some applications, energy saving can pay back unit cost in less than one year.

Due to its shielded incoloy heating elements and copper & brass casing, the TITAN-SCR2 is ideal in any application where mineral deposits shorten the life of a conventional water heater.

The TITAN-SCR2 Tankless Water Heater comes with a 10 year warranty on all water-carrying components and all other parts are warrantied for one year. Installation is quick and easy, requiring no venting and the TITAN-SCR2 compact size allows installation almost anywhere. The TITAN-SCR2 is without a doubt the Tankless Water Heater for the 21st century.

Compliance
Standards
Tested
Dade Approval
Dimensions
Weight
Materials
Pipe Fitting
Pressure Requirements
Voltage
Elements
Energy Efficiency
Activation
Indicators
Warranty
Protection 		UL-#499
ANSI-Z, 10.03
Applied Research Lab # 29-580
# 97-0627.16
7" W x 10" H x 2-3/4 D
8 Pounds
Brass Casing
1/2" Standard Pipe
5 PSI-Min./150 PSI-Max
220 VAC Std.(208/277 Avail.)
Dual Incoloy/Nichrome
Up to 99.5%
0.4 GPM-on/).3 GPM-off
Red-on/Amber-stand by
10 years on casing 1 year on components
Dual Microtemp Thermofuse - Manual Resetable Thermostat

 
U.S. Patent # 5,408,578

Note that the KW and Amps are controlled by the setting on the Power Mode.

Check specifications on unit used. Voltage, amperage, breaker and wire may vary depending on local electrical standards. Consult a professional plumber or electrician for guidance.

The electrical specifications are based on 220 volts. It should be noted that higher voltage will increase power, just as lower voltage will have the reverse effect. The (POWER MODE CONTROL) can be adjusted to compensate allowing the user to increase or decrease water temperature. For best performance adjust temperature at MEDIUM FLOW (approximately 1 GPM) this is the average water flow at any faucet with an aerator.

Remember, that any adjustments made on your unit will take seconds to reach point of use. DO NOT OVER HEAT WATER. Water temperature from 105F to 120F is adequate for all practical purposes
 
MODELS
Model Max KW at 220V Volts Max Amps at 220V
N-120 11.8KW 220V 54
N-100 10.8KW 220V 49
N-85 8.5KW 220V 38
N-75 7.5KW 220V 34
N-64 6.4KW 220V 29
N-42 4.2KW 220V 19
N-10 3.2KW 110V 29*

* N-10 uses 110 volts and will supply only warm water.



USES
House -Apartments - Condominiums - Beauty Salons - Hospitals - Boats - Laboratories - Campers - Offices - Schools - Cottages - Restaurants - Barber Shops - Warehouses. Anywhere hot water is needed.

We reserve the right to amend specifications as new technology develops.